Skip to main content

hp proliant - HP DL580 HDD Fan Issue

I recently obtained an HP ProLiant DL580 G7 without any HDDs so I went ahead and installed an SSD which works great and the other day I ordered a 2.5" SATA 2 TB HDD (ST2000LMB15).



After installing the new SATA drive, one of the temperature sensors on the servers (sensor 17) has seemingly jumped up to 47 degrees Celsius, the exact temperature necessary for the fans to increase their speed in an endless cycle until they hit their maximum speed (this is loud, WAY too loud!).



After removing the drive, the sensor magically returns to its normal 35 degrees Celsius temperature and the fan speeds begin to return to their normal speeds.



I have found a thread where two different people seem to run into this same issue but no solution was ever posted. At this point, I'm assuming that the HDD is reporting incompatible or incorrect data to the server and ultimately causing this annoying issue.




Right now, the only solution I see is to replace the drive with an enterprise SAS drive, but I wanted to check with the people here first to see if anyone has experienced this issue (or anything similar) before. This is the drive I'm considering replacing it with.

Comments

Post a Comment

Popular posts from this blog

iLO 3 Firmware Update (HP Proliant DL380 G7)

The iLO web interface allows me to upload a .bin file ( Obtain the firmware image (.bin) file from the Online ROM Flash Component for HP Integrated Lights-Out. ) The iLO web interface redirects me to a page in the HP support website ( http://www.hp.com/go/iLO ) where I am supposed to find this .bin firmware, but no luck for me. The support website is a mess and very slow, badly categorized and generally unusable. Where can I find this .bin file? The only related link I am able to find asks me about my server operating system (what does this have to do with the iLO?!) and lets me download an .iso with no .bin file And also a related question: what is the latest iLO 3 version? (for Proliant DL380 G7, not sure if the iLO is tied to the server model)
Post a Comment
Read more

linux - How can I get my mediawiki to stop thinking I have cookies disabled?

I've searched half a day for how to resolve this issue, and can't figure it out. Shortly after I made my wiki a simple private wiki according to the instructions at Mediawiki's website, it started giving me this weird login error message: Wiki uses cookies to log in users. You have cookies disabled. Please enable them and try again. If I remove those private wiki settings, the error disappears, even if I try logging in. But I need it to be a private wiki for only my team. So what do I do? Here's what I've done so far. Just to be safe, after ever change, I try rebooting Apache using: sudo /etc/init.d/apache2 restart In my php.ini file, I have the following set: session.save_path = "/var/lib/php5" session.cookie_secure = secure session.cookie_path = /tmp session.cookie_domain = my server's internal URL (should I even set this? this field was blank before, but not commented out) session.referer_check = Off I ran the following to ensure that the fold...
Post a Comment
Read more

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits, ...
Post a Comment
Read more