Skip to main content

raid - how many disks can saturate a 6GSAS controller ? :LSI 9260-8i



This is my build:




  • LSI 9260-8i: MAX read throughput of 2,875 MB/s, write performance of 1,800 MB/s

  • 24x SAS 10K RPM drives

  • 2x 100GB Dell SSDR (SATA) drives for ZIL and L2ARC




All plugged to same controller.




  1. With ZFS as the file system, can the LSI9260-8i sustain the peak loads?

  2. Do I need dedicated RAID controller for SSD's?

  3. Can use any SATA RAID like SAS6i?


Answer




The LSI 9260-8i has 8 x 6Gb/s SAS ports and that's the amount of throughput you'll get.



However, depending on your workload/application, disks rarely run at 100% throughput. It's more likely you'll reach the max number of IOPS of your disks (unless you're doing bulk reads, streaming, etc).



It also depends on how your SAS backplane "exports" these disks. For instance, some backplanes will have as many mini-SAS or standard SAS ports as there are disks. Others will use an expander like the SuperMicro 846E1 (24 disks for a mini-SAS x4 port).



SuperMicro has a chassis that (TQ edition) that exports all disks individually, in that case you'd need 3 x 8-port HBAs to connect all 24-disks. It makes cable management a bit trickier but has better performance.



My suggestion is that you first determine what workload your application will be throwing at this server before considering it doesn't fit your needs. If it's a NAS/SAN appliance, pay attentio


Comments

Post a Comment

Popular posts from this blog

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?
Post a Comment
Read more

ubuntu - Monitoring CPU, Mem, disk, on a single server

I've been looking for a simple starter solution for monitoring my [currently] single server hosted solution. Other than Nagios and similar, are there other good (simple) solutions people are using? Answer Everything depends on what you want. For example Munin is very simple, you can install and configure it in less then 10 minutes (on one server), it can sends alarms, make graphs from monitoring cpu, mem. apache connections, eaccellerator, disk io and many many more (it has many plugins). But if you are planning in future get some more machines, munin may not be enough. For example in munin you cant monitor state of individual processes, can't monitor changes in files (for security purpose). So if you wanna only see what is the utilization of basics parameters on your server and don't plan to buy some more servers Munin is what you are looking for, but if you wanna be alarmed when some of your service is down, take more control on what is happeninig on...
Post a Comment
Read more

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits, ...
Post a Comment
Read more