Skip to main content

cisco - ASA 5505: How do I access the DMZ web server from the inside using the public IP?

We are using a 5505 ASA Sec+ (8.2). There are three
interfaces: inside (172.17.0.0/24), dmz (172.16.0.0/24) and outside (1.2.3.4 for the
example).



There are static NAT rules set up
translating 1.2.3.4 to servers on the dmz (including 1.2.3.4:80 to 172.16.0.10:80).
These work from the outside.



How do I let users
on the inside access the DMZ servers using the outside IP in the same way as users on
the outside?



Because we are using port address
translation (several different servers depending on the port number), I want to avoid
DNS doctoring.



It does not matter whether we use
NAT or not for direct inside-dmz traffic (most traffic will be through the public IP
anyway).




The current
NAT
configuration:



ASA
Version 8.2(5)

same-security-traffic permit
inter-interface
same-security-traffic permit
intra-interface

global (outside) 1 interface
global (dmz)
2 interface
nat (inside) 1 172.17.0.0 255.255.255.0

nat
(dmz) 1 172.16.0.0 255.255.255.0
static (dmz,outside) tcp interface www
172.16.0.10 www netmask 255.255.255.255
static (dmz,outside) tcp interface
https 172.16.0.10 https netmask 255.255.255.255
access-group inside_access_in
in interface inside
access-group outside_access_in in interface
outside
access-group dmz_access_in in interface
dmz


With this minimal
configuration, the inside users cannot access the dmz servers at all. Both inside users
and dmz servers can access the internet outside just fine, and the dmz servers are
accessible from the internet.

Comments

Popular posts from this blog

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits, ...

linux - Awstats - outputting stats for merged Access_logs only producing stats for one server's log

I've been attempting this for two weeks and I've accessed countless number of sites on this issue and it seems there is something I'm not getting here and I'm at a lost. I manged to figure out how to merge logs from two servers together. (Taking care to only merge the matching domains together) The logs from the first server span from 15 Dec 2012 to 8 April 2014 The logs from the second server span from 2 Mar 2014 to 9 April 2014 I was able to successfully merge them using the logresolvemerge.pl script simply enermerating each log and > out_putting_it_to_file Looking at the two logs from each server the format seems exactly the same. The problem I'm having is producing the stats page for the logs. The command I've boiled it down to is /usr/share/awstats/tools/awstats_buildstaticpages.pl -configdir=/home/User/Documents/conf/ -config=example.com awstatsprog=/usr/share/awstats/wwwroot/cgi-bin/awstats.pl dir=/home/User/Documents/parced -month=all -year=all...