ip - Name Server 2 not answering to TCP/ Inconsistent Glue

I'm using Pingdom's DNS tools to check up on my
DNS.

I'm getting these
Errors:

Too few IPv4 name servers
(1).

Only one IPv4 name server
was found
for the zone. You should always have
at least two IPv4
name servers for a
zone to be able to handle transient

connectivity problems.

Inconsistent glue for name server

ns2.domain.com

The
address of a name server differed
from the child and the parent. This
is
a configuration error and should be
corrected as soon as
possible.

Name server
ns2.domain.com does not
answer queries over
TCP.

My
domain registrar is set to ns1.domain.com and ns2.domain.com
(example).

EDIT: My
Questions

How do I enable TCP on my
nameservers?
What is 'Inconsistent Glue'?
I have two Name Servers,
but I'm getting the "Too Few IPv4" error, what am I doing wrong
here?

(P.S: First Rev of post was bad, sorry,
early morning
post)..

Edit:

I've
seem to fixed the First and Second Error by adding "A Record" ns2.example.com ->
Pointing to my secondary IP and editing my resolver
file.

Still getting the error,
ns2.example not answering queries over TCP.
How can I fix this?

Comments

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?

ubuntu - Monitoring CPU, Mem, disk, on a single server

I've been looking for a simple starter solution for monitoring my [currently] single server hosted solution. Other than Nagios and similar, are there other good (simple) solutions people are using? Answer Everything depends on what you want. For example Munin is very simple, you can install and configure it in less then 10 minutes (on one server), it can sends alarms, make graphs from monitoring cpu, mem. apache connections, eaccellerator, disk io and many many more (it has many plugins). But if you are planning in future get some more machines, munin may not be enough. For example in munin you cant monitor state of individual processes, can't monitor changes in files (for security purpose). So if you wanna only see what is the utilization of basics parameters on your server and don't plan to buy some more servers Munin is what you are looking for, but if you wanna be alarmed when some of your service is down, take more control on what is happeninig on...

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits, ...

Blog

Search This Blog