ErrorDocument when using Apache as reverse-proxy

'evening,

I have an Apache server (2.2.19) and a 4D Webstar server (kinda unknown HTTP server) on the same physical server. Apache only listens the SSL port (443) and is used as a reverse-proxy to 4DW (through a SSL VHost).

Here are the two proxy directives I use :

ProxyPass / http://127.0.0.1:xxxx/ timeout=15 connectiontimeout = 15
ProxyPassReverse / http://127.0.0.1:xxxx/

Given the fact that the 4DW server can go offline from time to time, i'd like to have a custom 503 error page to notify the users of the downtime or maintenance of the back-end app.

Except Apache redirects everything from /htdocs/ (which is the documentroot) and we need quick access to the errordocument to edit it when needed (thus, an external errordoc is not an option).

Is there any way to force Apache not to proxy a given directory (let's say htdocs/error/), or any solution at all as to using an errordocument outside of the DocumentRoot?

Cheers

Answer

Sure, just exclude it from the ProxyPass rules. These are evaluated in order, so make sure the exclusion is on top:

ErrorDocument 503 /error/503.html
ProxyPass /error/ !

ProxyPass / http://127.0.0.1:xxxx/ timeout=15 connectiontimeout = 15
ProxyPassReverse / http://127.0.0.1:xxxx/

Comments

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?

ubuntu - Monitoring CPU, Mem, disk, on a single server

I've been looking for a simple starter solution for monitoring my [currently] single server hosted solution. Other than Nagios and similar, are there other good (simple) solutions people are using? Answer Everything depends on what you want. For example Munin is very simple, you can install and configure it in less then 10 minutes (on one server), it can sends alarms, make graphs from monitoring cpu, mem. apache connections, eaccellerator, disk io and many many more (it has many plugins). But if you are planning in future get some more machines, munin may not be enough. For example in munin you cant monitor state of individual processes, can't monitor changes in files (for security purpose). So if you wanna only see what is the utilization of basics parameters on your server and don't plan to buy some more servers Munin is what you are looking for, but if you wanna be alarmed when some of your service is down, take more control on what is happeninig on...

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits, ...

Blog

Search This Blog