Skip to main content

linux - Log every IP connecting on a system with iptables




Title says it all.



How can I, with iptables under Linux, log all IP connecting to a server?
As a little detail, I'd like to have only ONE entry in the log PER DAY PER IP.



Thanks :)



EDIT:



I narrowed it down to 5 packets logged for every new session which is weird since I use --hashlimit 1 --haslimit-burst 1, I suspect that --m limit which defaults to 5 plays a role in there. Trouble is, if I set --m limit to 1, only 1 entry is logged for ALL IP instead one per EACH IP.




The reason I want to do this is also to avoid as much as possible logs growing too fast since this will be a rather unmanaged box.



EDIT2:
Here is my current try, in a iptables-restore format:
(on several lines for ease of reading)



-A FORWARD -d 10.x.x.x -p tcp --dport 443 -m state --state NEW 
-m hashlimit --hashlimit-upto 1/min --hashlimit-burst 1
--hashlimit-mode srcip --hashlimit-name denied-client

-j LOG --log-prefix "iptables (denied client): "

Answer



I would try this:



# IP address entry older than one day
iptables -A ... -m recent --name mydaily ! --rcheck ! --seconds 86400 -j logandset
# IP address never seen before
iptables -A ... -m recent --name mydaily ! --rcheck -j logandset


# Custom chain for logging and refreshing
iptables -N logandset
iptables -A logandset -j LOG
iptables -A logandset -m recent --name mydaily --set


So your list mydaily will keep track of the last seen IP addresses, and if it was never seen before, or if the last seen is older than one day, the packet will be logged, and the list entry for that IP address be updated.



You should probably set ip_list_tot to a higher value for mydaily, as explained in the iptables manpage (In your case for /proc/net/xt_recent/mydaily).


Comments

Popular posts from this blog

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits,

apache 2.2 - Server Potentially Compromised -- c99madshell

So, low and behold, a legacy site we've been hosting for a client had a version of FCKEditor that allowed someone to upload the dreaded c99madshell exploit onto our web host. I'm not a big security buff -- frankly I'm just a dev currently responsible for S/A duties due to a loss of personnel. Accordingly, I'd love any help you server-faulters could provide in assessing the damage from the exploit. To give you a bit of information: The file was uploaded into a directory within the webroot, "/_img/fck_uploads/File/". The Apache user and group are restricted such that they can't log in and don't have permissions outside of the directory from which we serve sites. All the files had 770 permissions (user rwx, group rwx, other none) -- something I wanted to fix but was told to hold off on as it wasn't "high priority" (hopefully this changes that). So it seems the hackers could've easily executed the script. Now I wasn't able