linux - HPET missing from available clocksources on CentOS

I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation.

Motherboard: Supermicro X9DRW

Processor: 2x Intel(R) Xeon(R) CPU E5-2640

SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03)

Distro: CentOS 6.3

Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux

Grub: hpet=force clocksource=hpet

.config file:

CONFIG_HPET_TIMER=y 
CONFIG_HPET_EMULATE_RTC=y 
CONFIG_HPET=y

dmesg | grep hpet:

Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet
Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet

cat /sys/devices/system/clocksource/clocksource0/current_clocksource:

tsc

cat /sys/devices/system/clocksource/clocksource0/available_clocksource:

tsc jiffies

What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available.

Thanks in advance!

Comments

linux - iDRAC6 Virtual Media native library cannot be loaded

When attempting to mount Virtual Media on a iDRAC6 IP KVM session I get the following error: I'm using Ubuntu 9.04 and: $ javaws -version Java(TM) Web Start 1.6.0_16 $ uname -a Linux aud22419-linux 2.6.28-15-generic #51-Ubuntu SMP Mon Aug 31 13:39:06 UTC 2009 x86_64 GNU/Linux $ firefox -version Mozilla Firefox 3.0.14, Copyright (c) 1998 - 2009 mozilla.org On Windows + IE it (unsurprisingly) works. I've just gotten off the phone with the Dell tech support and I was told it is known to work on Linux + Firefox, albeit Ubuntu is not supported (by Dell, that is). Has anyone out there managed to mount virtual media in the same scenario?

hp proliant - Smart Array P822 with HBA Mode?

We get an HP DL360 G8 with an Smart Array P822 controller. On that controller will come a HP StorageWorks D2700 . Does anybody know, that it is possible to run the Smart Array P822 in HBA mode? I found only information about the P410i, who can run HBA. If this is not supported, what you think about the LSI 9207-8e controller? Will this fit good in that setup? The Hardware we get is used but all original from HP. The StorageWorks has 25 x 900 GB SAS 10K disks. Because the disks are not new I would like to use only 22 for raid6, and the rest for spare (I need to see if the disk count is optimal or not for zfs). It would be nice if I'm not stick to SAS in future. As OS I would like to install debian stretch with zfs 0.71 as file system and software raid. I have see that hp has an page for debian to. I would like to use hba mode because it is recommend, that zfs know at most as possible about the disk, and I'm independent from the raid controller. For us zfs have many benefits,

apache 2.2 - Server Potentially Compromised -- c99madshell

So, low and behold, a legacy site we've been hosting for a client had a version of FCKEditor that allowed someone to upload the dreaded c99madshell exploit onto our web host. I'm not a big security buff -- frankly I'm just a dev currently responsible for S/A duties due to a loss of personnel. Accordingly, I'd love any help you server-faulters could provide in assessing the damage from the exploit. To give you a bit of information: The file was uploaded into a directory within the webroot, "/_img/fck_uploads/File/". The Apache user and group are restricted such that they can't log in and don't have permissions outside of the directory from which we serve sites. All the files had 770 permissions (user rwx, group rwx, other none) -- something I wanted to fix but was told to hold off on as it wasn't "high priority" (hopefully this changes that). So it seems the hackers could've easily executed the script. Now I wasn't able

Blog

Search This Blog